prevent condensation

27 examples (0.03 sec)
  • The building must have provision to prevent condensation occurring in the roof structure.
  • The reduced heat flow also can prevent condensation which is triggered when the temperature of the inside surface falls below the dew point.
  • The engine is also fitted with a heater to keep it warm when not running so as to prevent condensation internally.
  • Mechanical ventilation is used at various points during the process to prevent condensation and accumulation of carbon dioxide.
  • A clear view screen is typically driven by an electric motor at the center of the disk, and is often heated to prevent condensation or icing.
  • Pipe insulation can prevent condensation forming, as the surface temperature of the insulation will vary from the surface temperature of the pipe.
  • Warm cabin air was diverted to prevent condensation on optical surfaces.
  • Certain building materials and mechanisms can be used to prevent condensation from occurring in these areas, therefore reducing structural dampness and potential mold infestation.
  • A cabin humidity control system may be added to the ECS of some aircraft to keep relative humidity from extremely low levels, consistent with the need to prevent condensation.
  • Heated glass has also been used in architectural window units to prevent condensation in the form of frost or fog, or as a supplementary heat source for the indoor environment.
  • Water vapor is removed from compressed air to prevent condensation from occurring and to prevent moisture from interfering in sensitive industrial processes.
  • Most thermal cyclers have heated lids to prevent condensation at the top of the reaction tube.
  • The generator has one pedestal bearing fed with oil from the diesel engine lubrication supply and is fitted with an internal heater to prevent condensation when not running.
  • The same or similar device had been used by William Edward Parry in 1821 to prevent condensation and aerate the lowest deck.
  • Most designers now include a moisture barrier on the inner side to prevent condensation from a body's moisture from condensing and freezing in the insulation.
  • Micro heaters can be used to raise the temperature from optical surfaces above ambient to enhance performance and to prevent condensation on the optical surfaces.
  • Prior to landing the compartment is flooded with nitrogen gas to prevent condensation of moisture on the chilled optics and instruments.
  • Often employing hoops over the head and feet, a bivy shelter is held sufficiently taut to keep the fabric off the occupant inside in order to prevent condensation from soaking into bedding.
  • Generally, these soil sensors are equipped with a built-in heater to prevent condensation from forming on the permeable membrane, as relative humidity can reach 100% in soil.
  • The processing of natural gas involves removal of butane, propane, and large amounts of ethane from the raw gas, in order to prevent condensation of these volatiles in natural gas pipelines.
  • Next »

How prevent condensation gets used