exhaust manifold

214 examples (0.04 sec)
  • Info In automotive engineering, an exhaust manifold collects the exhaust gases from multiple cylinders into one pipe. more...
  • An unusual feature of this engine's design is that it does not have a separate exhaust manifold.
  • Stock exhaust manifolds are usually made of cast iron and can be restrictive.
  • The exhaust manifold is now in one piece and passes gases towards the back of the engine.
  • The cylinder heads also sport a more conventional three-port exhaust manifold.
  • This is often fairly expensive as it usually includes replacing the entire exhaust manifold or other large components.
  • Higher flow exhaust manifolds and turbochargers were added for increased torque and slightly higher top-end power.
  • Inlet and exhaust manifolds are cast together and mounted on the near side.
  • The marine version, using a water-cooled exhaust manifold and expansion tank is also still available from other manufacturers.
  • The power increase was also helped by modifications to the cylinder head and exhaust manifold.
  • The exhaust manifolds featured a new center divider for better performance.
  • Dual hood ducts serve to move hot air away from the exhaust manifold.
  • The exhaust manifold is cast into the cylinder head, reducing warm up times and therefore further aiding efficiency.
  • The air is drawn from the heat stove, a metal plate around the (very hot) exhaust manifold.
  • A hot spot is identified, such as the exhaust manifold.
  • Warm air from the outside of an exhaust manifold is drawn up into the air cleaner to increase the air temperature as quickly as possible after the engine starts.
  • Costs can be reduced in production engines by casting the inlet and exhaust manifolds as one unit.
  • Many vehicles have a close-coupled catalytic converter located near the engine's exhaust manifold.
  • The turbocharger is still integrated into the exhaust manifold, but is of a different design.
  • When an engine exhaust valve is open, the pressure in the exhaust manifold is higher than atmospheric pressure.
  • One of these revisions was that the exhaust manifolds became part of the cylinder head casting.
  • Next »